Phone
Phone
Phone
Phone

Please rotate your device!

EPRadial

magnetic chuck on turn-
discus grinding machines

Send request

ideal for clamping big,
rotationally-symmetrical
workpieces

Send request

Round Magnetic Chuck EPRadial

The Electropermanent Magnet Chuck from Assfalg is ideal for clamping big, rotationally-symmetrical workpieces from 400 mm diameter without distortion, particularly on lathes and discus grinding machines (hard processing)

A central through-hole can always be mounted. If the magnetic chuck is additionally provided with T-slots, fixed and mobile pole extensions or stops may be used. Thus, raw parts and uneven workpieces can be clamped without distortion and sublime.

ADVANTAGES

  • Extremely short set-up times due to simple and fast clamping of workpieces
  • 5-side processing, as only one workpiece side is required for magnetic clamping
  • Distortion-free holding of raw part or uneven workpiece, because positive-locking clamping by means of fixed and mobile pole extension becomes possible (underlining of workpieces is not necessary any more!)
  • No damages to the magnetic chuck in case of breakouts, because the workpiece can be clamped raised to pole extensions
  • Slight adjustment of the magnetic adhesion power to thin workpieces or when aligning by means of the adhesion power regulation
  • Extremely high, permanent, magnetic adhesion power at activation within seconds
  • Through holes or surrounding clamping slots for fastening on machine table or device
  • Special cable with bayonet fixing or fixed cable with slip ring carrier enable a connection of magnetic chuck and controller

Application

The electropermanent magnetic chuck EPRadial

The Electropermanent Magnet Chuck from ASSFALG is ideal for clamping big, rotationally-symmetrical workpieces (e.g. bearing ring processing,) from 400 mm diameter without distortion, particularly on lathes and discus grinding machines (hard processing).

The electropermanent magnetic chuck Radialpol shows an extreme chip removal in hard turning of small and large workpieces. This is only possible with great adhesion forces, as with the magnetic chuck Radialpol. For grinding highest precision is achieved.

If the magnetic chuck Radialpol is provided with T-slots, fixed and mobile pole extensions can be used. This is a precondition for 3-side machining. Thereby, the workpiece is clamped sublime can be machined without any damage of the magnetic chuck.

Special cable with bayonet fixing or fixed cable with slip ring carrier enable a fast and easy connection of magnetic chuck and controller. With through-holes, this magnetic chuck can be mounted on the machine table or the device.

Alternative application option for the round magnetic chuck EPRadial

4x magnetic chucks Magnaslot in composite on a turntable

4x magnetic chucks Magnaslot in composite on a turntable

Are you interested?

Are you interested in our products or require in-depth support? Contact us via email or phone.
Our experts are ready to help!

Economy

The magnetic chuck Radialpol allows rapid clamping. By using fixed or mobile pole extensions, a form-fitting and distortion-free clamping of raw parts and uneven workpieces is possible. Therefore, the time-consuming underlining of workpieces is dispensed.

Thereby, set-up times and -costs are reduced and productivity is increased. By holding force control the magnetic holding force can be adapted to thin workpieces. Optionally, the electropermanent magnetic chuck Radialpol can be also delivered with T-slots, so that additional stops or pole extension can be fixed.

EPRadial
EPRadial

Safety

The electropermanent magnet chuck Radialpol is a massive executed pole plate with an equally strong magnetic field.

The electropermanent magnetic chuck technology guarantees the highest possible safety, only one current pulse is necessary for clamping. Holding the workpiece on the magnetic clamping plate takes place with re-poled permanent magnets. The high and lasting adhesion forces remain even during a power failure. Thus, this special magnetic chuck lays all foundations for operational safety, ease of use and precision.

Activating and deactivating (magnetizing and demagnetizing) takes place by a short current pulse within seconds by the controller. During the machining operation, the power supply is interrupted, and therefore heat development is excluded. Thus no deformations occur due to temperature variations.

Download our catalogues now

Would you like to learn more about clamping and lifting magnets? Our catalogues offer a wide overview on our entire range of products. Download now!

Interesting products

Elift

Elift

The hand-operated Permanent Lifting Magnet Elift (formerly SK-I) is the perfect and fully developed solution for moving…

view Product
SB500

SB500

The electropermanent battery lifter SB500 is a top product from Assfalg in the load range of 500 kg for flat material a…

view Product
MAGNASLOT

MAGNASLOT

The patented (EPM) electropermanent quadratic pole plate ***Patent-Nr. EP1874504*** is the perfect solution to clamp fe…

view Product